Southwestern Bell GH3210 - Manual (Page 8)

8
Charger Unit Controls and Indicators
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA.On the bottom of this equipment is a label that contains, among other information,
a product identifier in the format US:47GW902BGH3210US.If required, this number must
be provided to the telephone company .
An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring
using a compatible modular jack which is Part 68 compliant. See Installation Instructions
for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of the RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local telephone company(For products
R
CHARGE
DC In 9v DC 100mA
Connect AC adaptor(B) cord here
Charger LED
Lights when the handset is
on the cradle and the battery
is being charged
FCC WANTS YOU TO KNOW