SRS Labs CP-X505/CP-X605 - Manual (Page 13)

13
Remote control
Putting batteries
Please load the batteries before using the remote control. If the remote control starts to
malfunction, replace the batteries. If you will not use the remote control for an extended
period, remove the batteries from the remote control and store them in a safe place.
1. Slide back and remove the
battery cover in the direction
of the arrow.
2. Align and insert the two AA
batteries according to their
plus and minus terminals as indicated in the remote control.
3. Replace the battery cover in the direction of the arrow and snap it back into place.
Laser pointer
7KLVUHPRWHFRQWUROKDVDODVHUSRLQWHULQSODFHRID¿QJHURUURG7KHODVHUEHDPZRUNV
and the LASER INDICATOR lights while the LASER button is pressed.
Remote control