SRS Labs CP-X505/CP-X605 - Manual (Page 31)

31
INPUT Menu
INPUT Menu
Item Description
PROGRESSIVE
8VLQJWKHŸźEXWWRQVVZLWFKHVWKHSURJUHVVPRGH
TV Ù FILM Ù TURN OFF
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or COMPONENT VIDEO input of 525i
(480i), 625i (576i) or 1125i (1080i) signal.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
VIDEO NR
8VLQJWKHŸźEXWWRQVVZLWFKHVWKHQRLVHUHGXFWLRQPRGH
HIGH Ù MID Ù LOW
• This function performs only at a VIDEO input, an S-VIDEO or
COMPONENT VIDEO input of 525i(480i), 625i(576i) or 1125i (1080i)
signal.
• When this function is excessive, it may cause a certain
degradation of the picture.
3D-YCS
8VLQJWKHŸźEXWWRQVVZLWFKHVWKH'<&6PRGH
STILL Ù MOVIE Ù TURN OFF
• This function performs only at a VIDEO input of NTSC, and PAL.
• MOVIE is the mode for images with a lot of motions like movies,
and STILL is the mode for images with few motions or completely
still ones like slides.
COLOR SPACE
8VLQJWKHŸźEXWWRQVVZLWFKHVWKHPRGHIRUFRORUVSDFH
AUTO Ù RGB Ù SMPTE240 Ù REC709 Ù REC601
• This item can be selected only for an RGB signal or a component
video signal (except 525i (480i), 625i (576i) and SCART RGB).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
From the INPUT menu, items shown in the table below can
be performed.
6HOHFWDQLWHPXVLQJWKHŸźFXUVRUEXWWRQVRQWKH
SURMHFWRURUUHPRWHFRQWURODQGSUHVVWKHŹFXUVRUEXWWRQ
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table. /'07=4)$? 
 5'.'%6

8+&'1(14/#6#761
%1.1452#%'#761
&;%556+..
(4#/'.1%-674010

4'51.76+10
4)$+0
/&014/#.
%1/210'06%1/210'06
241)4'55+8'68
8+&'104/+&
+/#)'
2+%674'
5'672
+0276
5%4''0
126+10
#7&+1
0'6914-
'#5;/'07
(continued on next page)