SRS Labs CP-X505/CP-X605 - Manual (Page 51)

51
Item Description
SECURITY
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition
Detector function is ON.
4.1 Turning On the Transition Detector Function
4.1-1 8VHWKHŸźEXWWRQVRQWKH6(&85,7<PHQXWR
VHOHFW7UDQVLWLRQ'HWHFWRUDQGSUHVVWKHŹRUWKH
ENTER button to display the Transition Detector
on/off menu. Select TURN ON and the current
angle and mirror setting will be recorded.
NOTE: This feature may not function properly if the projector
is not in a stable position when TURN ON is selected.
4.1-2 If this function is set to TURN ON when the
vertical angle of the projector or mirror setting
at which the projector is turned on is different
than the previously recorded the Transition
Detector Alarm will be displayed and the
projector will not display the input signal.
If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off.
This function will activate only when the projector is started after the power
switch was turned off.
4.2 Setting the Transition Detector PASSWORD
8VHWKHŸźEXWWRQVRQWKH6(&85,7<PHQXWRVHOHFW7UDQVLWLRQ
'HWHFWRUDQGSUHVVWKHŹRUWKH(17(5EXWWRQWRGLVSOD\WKH
Transition Detector on/off menu.
8VHWKHŸźEXWWRQVRQWKH7UDQVLWLRQ
Detector on/off menu to select TURN ON.
The ENTER PASSWORD BOX (small) will be
displayed.
8VHWKHŸźŻŹEXWWRQVWRHQWHUD
PASSWORD. Move the cursor to the right
side of the ENTER PASSWORD BOX
VPDOO DQGSUHVVWKHŹEXWWRQWRGLVSOD\WKH
CHECK PASSWORD BOX, enter the same
PASSWORD again.
4.2-4 Move the cursor to the right side of the
CHECK PASSWORD BOX and press the
ŹEXWWRQWRGLVSOD\WKH3$66:25'IRU
about 20 seconds, please make note of the
PASSWORD during this time.
Pressing the ENTER button on the remote control or
the INPUT button on the projector will return to the
Transition Detector on/off menu.
• Please do not forget your Transition Detector PASSWORD.
OPTION Menu (continued)
OPTION Menu
64#05+6+10&'6'%614
674010
67401((
Transition Detector
on/off menu
Transition Detector Alarm
2+0$1:


64#05+6+10&'6'%61410
6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF
HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP
+H[QWYKUJVQJCXGCUSWCTGKOCIG
QPUETGGPCICKP
FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW