SRS Labs CP-X505/CP-X605 - Manual (Page 48)

48
Item Description
SECURITY
1.3 If you have forgotten your PASSWORD
1.3-1 Follow the procedure in 1.1-1 to display the
ENTER PASSWORD BOX.
1.3-2 While the ENTER PASSWORD BOX is
displayed, press and hold the RESET button
on the remote control for about 3 seconds or
SUHVVDQGKROGWKH,1387DQGŹEXWWRQVRQ
the projector for about 3 seconds.
The 10 digit Inquiring Code will be displayed.
NOTE: If there is no key input for about 55 seconds
while the Inquiring Code is displayed the menu will
close. If necessary repeat the process from 1.3-1.
1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
ZLOOEHVHQWDIWHU\RXUXVHUUHJLVWUDWLRQLQIRUPDWLRQLVFRQ¿UPHG
2. Using the MyScreen PASSWORD Function
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.
2.1 Turning on the MyScreen PASSWORD
Function
8VHWKHŸźEXWWRQVRQWKH6(&85,7<
menu to select MyScreen PASSWORD and
SUHVVWKHŹEXWWRQWRGLVSOD\WKH0\6FUHHQ
PASSWORD on/off menu.
2.2 Setting the PASSWORD
2.2-1 Display the MyScreen on/off menu using the
procedure in 2.1-1.
8VHWKHŸźEXWWRQVRQWKH0\6FUHHQ
PASSWORD on/off menu to select TURN ON.
The ENTER PASSWORD BOX (small) will be
displayed.
8VHWKHŸźŻŹEXWWRQVWRHQWHUWKH
PASSWORD. Move the cursor to the right
side of the ENTER PASSWORD BOX
VPDOO DQGSUHVVWKHŹEXWWRQWRGLVSOD\WKH
CHECK PASSWORD BOX, enter the same
PASSWORD again.
5'%74+6;2#55914&


+PSWKTKPI%QFG
         
OPTION Menu (continued)
OPTION Menu
/[5ETGGP
'06'42#55914&
0':6

37+6
Inquiring Code
(PASSWORD)
/[5ETGGP
%*'%-2#55914&
0':6

37+6
CHECK PASSWORD
BOX
/[5ETGGP2#55914&
674010
67401((
MyScreen PASSWORD
on/off menu
ENTER PASSWORD
BOX (small)
(continued on next page)