Monitoring the audio signal via headphones – Sennheiser Rack-mount Receiver EM 300 G3 User Manual

Page 22

Advertising
background image

Using the receiver

21

To switch the receiver to

standby mode

:

To completely switch the receiver

off

:

̈

Disconnect the receiver from the mains by unplugging the mains unit
from the wall socket.
The backlighting of the

STANDBY

button

goes off.

Monitoring the audio signal via headphones

̈

Set the headphone volume control

·

to the minimum position.

̈

Connect headphones with a ¼” (6.3 mm) stereo jack plug to the head-
phone output

³

.

̈

Gradually increase the volume and monitor the audio signal with the
lowest possible volume.

̈

Keep the

STANDBY

button

pressed until “

OFF

” appears on

the display panel.
The receiver switches to standby mode.

When in the operating menu, pressing the

STANDBY

button

will

cancel your entry (ESC function) and return you to the current stan-
dard display.

The

STANDBY

button

is backlit in red both during operation and

in standby mode.

CAUTION!

Danger of hearing damage!

Listening at high volume levels for long periods can lead to permanent
hearing defects.

̈

Set the headphone volume control

·

to the minimum position before

putting the headphones on.

531.675

SKM300

ew300 G3

B.Ch: 20.24

EQ

+ 12dB

MHz

P

PEAK

-10

0

40

30
20
10

-20

-40

AF

RF

-30

³ ·

·

40
30
20
10

RF

Advertising