Sennheiser Rack-mount Receiver EM 300 G3 - Manual (Page 29)

Using the operating menu
28
“Easy Setup”
Reset List Releases all locked frequency presets
34 Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits “ Easy Setup ” and returns to the main menu –
Extended menu “Advanced Menu”
Tune Sets the receiving frequencies for the frequency banks “ U1 ” to “ U6 ” 38
Sets the frequency bank, the channel and the transmission
frequency (frequency banks “
U1 ” to “ U6 ”)
39
Sync Settings Calls up the “ Sync Settings ” submenu:
Adjusts the parameters to be transferred to the transmitters and
activates/deactivates the transfer (see below) 28
Pilot Tone Activates/deactivates the pilot tone evaluation 40
Warnings Calls up “ Warnings ”: Activates/deactivates warnings
(color change and warning messages)
41
LCD Contrast Adjusts the contrast of the display panel 42
Reset Resets the settings made in the operating menu 42
IP-Address Adjusts the IP address of the receiver 42
Software Revision Displays the current software revision 43
Exit Exits the extended menu “ Advanced Menu ” and returns
to the main menu
–
“Sync Settings”
SK Settings Adjusts the parameters to be transferred to the SK transmitters and
activates/deactivates the transfer
39
SKM Settings Adjusts the parameters to be transferred to the SKM radio
microphone and activates/deactivates the transfer
Exit Exits the “ Sync Settings ” submenu and returns to the extended
menu “ Advanced Menu ”
Display Function of the menu item Page