Sennheiser Rack-mount Receiver EM 300 G3 - Manual (Page 37)

Adjustment tips and functions
36
Entering a name
Via the “ Name ” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver.
The name is displayed on the “ Receiver Parameters ” standard display and
can consist of up to eight characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the audio output level
Adjustment range: –24 dB to +24 dB, adjustable in 3-dB steps
Via the “ AF Out ” menu item, you can adjust the level of the audio output
AF OUT from the receiver to the input of the connected device. The
following figures are a guide to the best settings:
Gain values greater than +18 dB should only be used when the audio
modulation from the transmitter is at a low level, otherwise the audio
output of the receiver may become clipped and distorted.
Squelch
Easy Setup
Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
̈ Turn the jog dial to select a character.
̈
Press the jog dial to change to the next segment/character or to
store the complete entry.
Call up “Name”
Menu
Frequency Preset
Name
AF Out
Lichael
Enter a character and
confirm
Name
L ichael
Enter a character;
store the setting
Name
Michae l
“Stored”
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
Squelch
Easy Setup
Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
Connected device Guide values for “AF Out”
Line 0 to +18 dB (+24 dB)
Microphone
−24 dB to −6 dB