Sennheiser Rack-mount Receiver EM 300 G3 - Manual (Page 39)

Adjustment tips and functions
38
The extended menu “ Advanced Menu ”
To get into the extended menu “ Advanced Menu ”:
̈
From the main menu, select “ Advanced ”.
Setting the receiving frequencies and the frequency banks “U1” to “U6
Via the “ Tune ” menu item, you can set a receiving frequency to be stored
in the current channel or you can select a different channel in one of the
frequency banks “ U1 ” to “ U6 ” and assign this channel a receiving
frequency.
Setting a receiving
frequency for the
current channel
̈
Set the desired frequency.
Squelch
Easy Setup
Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
Tune
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
When you have selected one of the system banks and then select
the “
Tune ” menu item, the receiver automatically switches to
channel 1 of the frequency bank “ U1 ”. In this case, “ U1.1 ” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks “ U1 ” to “ U6 ”
are not assigned a receiving frequency.
It is vital to observe the notes on frequency selection on page 44.
̈
Turn the jog dial until the “ Tune ” menu item appears.
̈
Press the jog dial.
The frequency selection appears.
̈
Press the jog dial.
Your settings are stored.
You are back to the operating menu.
Call up “Tune” Select the MHz value
and confirm Select the kHz value;
store the setting
Advanced Menu
531.375 MHz
Tune
B.Ch: U1. 1
531 .375 MHz
Tune
B.Ch: U1. 1
534. 208 MHz
Exit
Tune
Sync Settings
“Stored”
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30
PEAK
-10
0 40
30
20
10
-20
-40
AF RF
-30