Samsung DVD-TR520 - Manual (Page 73)

English - 73
R
ecording This * marked parts are compatible with CPRM.
Once “Copy Once” has been recorded, recording
cannot be done anymore.
- Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the media on
which it is recorded. It is supported by some DVD
RECORDERs, but not by many DVD players. Each blank
recordable DVD has a unique 64-bit media ID etched in the
BCA. When protected content is recorded onto the disc, it can
be encrypted with a 56-bit C2 (Cryptomeria) cipher derived
from the media ID.
During playback, the ID is read from the BCA and used to
generate a key to decrypt the contents of the disc. If the
contents of the disc are copied to other media, the ID will be
absent or wrong and the data will not be decryptable.
Media
Copy-Free Copy-Once Copy-Never
DVD-RW(Ver.1.1) O - -
DVD-RW(Ver.1.1)
with CPRM
VR mode O O* -
V mode O -
DVD-R O -
DVD-RAM(Ver.2.0) O O* -
Signal type
Recording the current TV
program you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
If an unused DVD-RAM disc is used, you will be
prompted to format first. Make your selection using the
œ √ buttons, then press ENTER button. (See page 72)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. Make your selection, using
the
œ √ buttons, then press the ENTER button.(See
page 72)
2 Press the CH ( ) or number buttons to select
the current program you want to record.
Unformatted Disc
Do you want to format this disc?
Yes No
Uninitialized Disc
Do you want to initialize this disc?
Yes No
Unrecordable video
Video with copy protection cannot be recorded on this
TWIN TRAY DVD RECORDER.
When the TWIN TRAY DVD RECORDER receives a copy
guard signal while recording, recording stops and the
following message appears on the screen.
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one
of the following three signal types, Copy-Free, Copy-Once and
Copy-Never. If you want to record a copy-once type program,
use DVD-RW with CPRM in VR Mode and DVD-RAM.
You cannot record copy protected movie.
00627D-DVD-TR520_XAA_71-80 2005.7.26 9:35 AM Page 73