Samsung DVD-TR520 - Manual (Page 78)

78 - English
R
ecording
• Start/End Time : Start and end time of the timer
recording.
• Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to
set video quality automatically. In FR mode, the
most suitable record mode is adjusted automatically,
according to remaining time on the disc and length
of the timer recording.
- XP (high quality) : Select when video quality is
important.
- SP (standard quality) : Select to record in standard
quality.
- LP (low quality) : Select when a long recording time
is required.
- EP (extended) : Select when a longer recording time
is required.
■ When you are recording at EP mode on a
DVD-RW(V mode)/-R disc, it may not
record the full 6 or 8 hours because the
unit uses the VBR(Variable Bit Rate)
ENCODING system. For example, if you
record a program with a lot of action, it
uses a higher bit rate which in turn
consumes more disc memory.
NOTE
Using the ANYKEY button.
• Press the ANYKEY button.
• Press the …† buttons to select Add, then press
the ENTER or √ button.
3 Set timer recording option.
• Fill the input items using the
…†œ √ buttons and
number buttons.
œ √ : Moves to the previous/next item.
…† 0~9 : Sets a value.
• Source : The video input source (AV1, AV2), or the
broadcasting channel you want to make a timer
recording from.
• Date : Timer Recording allows setting the
recording time within one month period. Set the
recording day. (day/month)
01 JAN Every Day
02 JAN MON-SAT
03 JAN MON-FRI
Every SAT
30 JAN
31 JAN
Every SUN
4 After selecting the set up value for each mode, press the
ENTER button to select Save, and press the ENTER
button again.
• will appear on the front panel. It means that a
timer recording is registered.
If the timer settings overlap;
The programs are recorded in order of priority.
If timer recording is set for the first program and
then again for the second program and both
programs overlap, the following message will
appear on the screen: “This setting is identical with
1.” The message shows that the first program
has priority. After recording of the first program is
complete, the second program starts being
recorded.
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
5 Press the MENU button to finish the Timer Recording
setting.
■ The timer recording time may differ from
the set time depending on disc status and
overall timer recording status (for example,
recording times overlapping, or when the
previous recording ends within 2 minutes
before the start time of the next recording.)
■ You can set up to 12 Timer Recordings.
NOTE
00627D-DVD-TR520_XAA_71-80 2005.7.26 9:35 AM Page 78