Samsung DVD-TR520 - Manual (Page 74)

74 - English
R
ecording
3 Press the REC MODE button repeatedly, (or press the
REC MODE button and then press the
… …† † buttons) to
select the recording speed (quality).
➞ SP ➞ LP ➞ EP ➞ XP
4
Press the REC button.
Information concerning the channel is displayed
on the screen, then recording begins.
Icon(
) is displayed on the front panel.
- To pause recording -
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
CH ( ) buttons while recording pauses.
- To stop recording -
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the message
“Updating the information of disc. Please wait for a
moment” is displayed.
■ You cannot change the recording mode
and the channel while recording.
■ Recording will stop automatically if there is
no free space left for recording.
■ Up to 99 titles can be recorded onto a
disc.(DVD-RAM/-RW/-R)
■ Recording will stop automatically if a copy
protected image is selected.
■ DVD-RAM/-RW discs must be formatted
before starting to record. Most new discs
are sold unformatted.
■ Do not use DVD-R authoring discs with
this TWIN TRAY DVD RECORDER.
NOTE
Record Mode SP 031:39
● Recording : CH 11 [Mono]
Recording from external
equipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 72)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 72)
2 Press the INPUT button to select the input source
according to the connection you made.
The front panel display changes in the following
sequence:
➞ CH Number ➞ AV 1 ➞ AV 2 ➞ DV
If you connect a digital camcorder, press the INPUT
button to select DV. (See pages 75~76)
Before you start
00627D-DVD-TR520_XAA_71-80 2005.7.26 9:35 AM Page 74