Advanced recording, Handling menus and quick menus, Using the q.menu button – Samsung HMX-R10SN User Manual
Page 60: Using the menu ( ) tab
• When using the menu or Q.MENU items, some menu items can not be used at the same
time, or may be grayed out.
• For more information, see the Troubleshooting pages, “140~147.”
• For the purpose of easy understanding, all the menu setting examples from this page are
explained based on the simplest methods.
The menu setting methods can be different depending on the user's chosen menu options.
advanced recording
HANDLING MENUS AND QUICK MENUS
Follow the instructions below to use each of the menu items listed in this manual.
This chapter uses “Aperture,” and “Focus” functions of the video record mode as an example.
1.
Open the LCD screen to turn on the camcorder.
• If you fi nd the LCD screen is already open when the power
is turned off, press the power (
) button to turn on the
camcorder.
2.
Select the Video (
) or Photo (
) mode by pressing the MODE
button.
3.
Press the Q.MENU button on your camcorder to see the available
menu options. The quick menu screen appears.
4.
Touch “Focus.” (The Focus function is used here as an example.)
5.
Touch the desired option.
• Adjust the setting values accordingly.
• To exit the menu, touch the Exit ( ) or Return (
) tab.
Using the Q.MENU button
1.
Open the LCD screen to turn on the camcorder.
• If you fi nd the LCD screen is already open when the power is turned
off, press the power (
) button to turn on the camcorder.
2.
Select the Video (
) or Photo (
) mode by pressing the MODE
button.
3.
Touch the Menu (
) tab on the touch panel.
• The menu screen appears.
• To change the current page, touch up (
)/down (
) tab.
4.
Touch “Aperture” (The Aperture function is used here as an example.)
• Some functions cannot be used at the same time. In this case, a
message appears and asks if you accept that the related function
is disabled. Touch “Yes,” to disable the related function setting and
then continue the menu setting as you desired.
5.
Touch the desired option. Adjust the setting values accordingly.
• Touch the decrease (
• Touch the decrease (
) or increase (
) or increase (
) tab to adjust the aperture
as you want.
• To exit the menu, touch the Exit ( ) or Return (
) tab.
Using the MENU ( ) tab
DC IN
STBY
00:00:00 [55Min]
90
MIN
Q.MENU button
Menu(
) tab
Auto
Manual
1 / 1
Focus
Touch Point
Resolution
EV
Back Light
Focus
<This illustration is based
on the default setting value>
/
Aperture
Shutter
90
MIN
3D-NR
EV
0
/
90
MIN
3D-NR
조리개
셔터
노출 보정
0
The following setting will be
changed. Continue?
[
Super C.Nite ]
YES
NO