Samsung HMX-R10SN - Manual (Page 90)


Example of Time Lapse Recording
The Time Lapse Recording function records image frames at the predefined interval
over the total recording time to produce a time-lapse video.
For example, the Time Lapse Recording is useful for filming in the following situations:
- Blooming flowers
- A bird building a nest
- Clouds rolling by in the sky
Total time of recording
Recording interval
Time for recording on the
storage media (a video of the
Time Lapse Recording.)
• Time Lapse Recording mode is released once recording has been finished. To start another Time
Lapse Recording, repeat steps 1-5.
• 30 captured images compose a video of 1 second length. Since the minimum length of a video
to be saved by your camcorder is one second, the interval defines how long the Time Lapse
Recording should be taken. For example, if you set the interval to “30 Sec,” Time Lapse Recording
should be taken for at least 15 minutes to record a minimum video length of 1 second (30 images).
• Once the Time Lapse Recording finishes recording for its total recording time, it switches to the
standby mode.
• Press the Recording start/stop button if you want to stop the Time Lapse Recording.
• Audio is not recorded during Time Lapse Recording.
• When a video recording fills up 3.8GB of storage memory, a new recording file is automatically
started at that point.
• When the battery charge was exhausted during the Time Lapse recording, it saves recording up to
that point and switches to standby mode. After a while, it displays a warning message, then turns
off automatically.
• When the memory space of the storage media is insufficient during the Time Lapse Recording, it
switches to the standby mode after saving the recording up to its maximum.
• We recommend using the AC power adaptor for a Time Lapse Recording.
advanced recording
Memory full!
00:05:00 / 00:16:00
100-0001
160
MIN
Memory full!
00:09:00 / 00:16:00
100-0001
160
MIN
Memory full!
00:14:00 / 00:16:00
100-0001
160
MIN