SIGMA SD10 - Manual (Page 25)

25
SETTING THE LANGUAGE
Camera menus and messages that appear on the color LCD monitor can be
displayed in either English, Japanese, German or French. You should receive
the SD10 camera pre-set to English, however, if necessary, you can change the
camera language yourself.
1
Make sure the camera is turned on.
2
Press the ＜ MENU＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use the
＜ ／ ＞
arrows on the 4-way
controller to select “Language”.
4
Press the
＜ ＞
arrow or
＜
OK＞ to open the
sub-menu.
5
Use the
＜ ／ ＞
arrows on the 4-way
controller to select the desired language.
Language options are English, Japanese,
German and French.
6
Press the ＜ ＞ arrow or ＜
OK＞ to apply the
setting or the ＜ ＞ arrow or ＜
CANCEL＞ to
close the sub-menu without making any
changes.