SIGMA SD10 - Manual (Page 30)

30
FILE NUMBERING SYSTEM
The images you take are automatically assigned file numbers from 00001 to
99999. When images are being reviewed, the file number of each image is
displayed in the left corner of the Info Strip (see
P.68 ). The file number is also
incorporated into the filename of the image. The filename consists of “IMG”
followed by the five-digit file number and extension. For example: image
number 00023 will be stored in the file IMG00023.X3F. All SD10 image files
will be stored in the /IMAGES folder on the CF card.
File numbering can be continuous, or can be reset every time an empty card is
detected. Use the Camera Set-up Menu to set the file numbering system.
FILE NUMBERING OPTIONS
OPTION DESCRIPTION
Continuous
(Default) Numbering is continuous. The first file number assigned on an
empty card will be one higher than the last assigned number.
(If the inserted card contains SD10 images with file numbers
greater than the last assigned number, file numbering will
continue with one higher than the highest file number on the
card.)
Auto Reset Each time an empty CF card is inserted, or all images on the
current card are deleted, the file number will reset to its default
value of 00001. (If the inserted card already contains SD10
images, the file number will not be reset).
TO SET FILE NUMBERING SYSTEM
1
Make sure the camera is turned on.
2
Press the ＜ MENU＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use ＜ ／ ＞ arrows on the 4-way controller
to select “File Numbering”.