SIGMA SD10 - Manual (Page 42)

42
BULB SETTING
When long time exposures are required (for shooting night scenes or very dark
subjects) the use of the “Bulb” setting is recommended. Please use tripod when
taking pictures with this setting. Bulb photography can be performed only when
ISO sensitivity is set to ISO100 and 200. (Please refer to P.52 about setting ISO
sensitivity.)
1
Set the dial to the “D”-Dial on the “Drive Area”
(P.14).
2
Set the “Mode”-Selector to the “M” position.
3
Turn the “S” –Dial until “bulb is displayed on the
top LCD panel. And select the aperture value by
“C” –Dial.
4
Depress the shutter button fully to take the
picture.
CAUTION !!
•
Bulb photography is possible only when ISO sensitivity is set to ISO100 and
200. Bulb photography cannot be performed at ISO 400 and ISO 800.
•
If extended mode is selected, you can use bulb photography upto 30sec. in any
ISO settings.（see P.62）
•
Self-timer function and the bulb exposure function cannot operate together. If the
“D”-dial set to self-timer function in “bulb” exposure mode, the shutter defaults to
1/180 second for SD10.