SIGMA SD10 - Manual (Page 92)

92
SHOWING A SLIDESHOW
All images on the CF card, or only selected images, can be shown in an
automatic playback mode using the SD10 camera’s Slideshow feature.
SLIDESHOW MENU
MENU ITEM DESCRIPTION
Resume show Resume a stopped slideshow. (Not available if there is no
slideshow to resume)
Show all Start an automated slideshow of all images on the CF card.
Show marked Start an automated slideshow of all marked images on the
CF card.
Show locked Start an automated slideshow of all locked images on the
CF card.
Settings… Change slideshow settings.
TO START A SLIDESHOW
1
Identify the images that you wish to include in
the slideshow by marking or locking them. (See
P.82-87)
2
Press
＜
MOD＞ to display the Modification
Menu.
3
Use the
＜ ／ ＞
arrows on the 4-way
controller to select the Slideshow Menu.
4
Use the
＜ ／ ＞
arrows on the 4-way
controller to select the slideshow contents: all
images on the card, only the marked images, or
only the locked images.
5
Press
＜
OK＞ to close the Modification Menu
and begin the slideshow.