SimplySmart Smart Board Software For Mac OS X 99-00557-01 - Manual (Page 13)

Macintosh Version Using SMART Board Software in Projected Mode 7
Press the SMART Board icon in the Dock and select Open Orient.
The Orientation screen appears. Follow the on-screen instructions.
1. Press and hold the SMART Board icon in the Dock and select Open Control Panel.
2. Press the Advanced button on the Boards tab.
The Edit Advanced Board Settings dialog box appears.
3. On the Pick Orientation Precision tab, press the orientation level that you prefer.
4. Press Apply, and then press OK to close the Edit Advanced Board Settings dialog
box.
5. If you want to orient the screen, press the Orient button on the SMART Board Control
Panel.
6. Press OK to close the SMART Board Control Panel.
Adjusting the Projected Image
For both front and rear projection SMART Board interactive whiteboards, you can fix many
image problems by shifting the projector or adjusting the zoom lens. Optimally, you should
have a margin of approximately 3/8" (1 cm) on both the right and left sides of the screen.
You should set the projector to its optimal image resolution by following the instructions in your
projector’s manual. Then set your computer’s resolution to match. If the resolutions don’t
match, the on-screen image won’t properly fill the interactive screen and may shimmer or be
distorted.
1. Select Systems Preferences from the Apple menu.
2. In the Systems Preferences, double click Displays.
3. Click the Display tab and select a new resolution.
4. Close the Displays window.
To orient the interactive screen
To change the orientation level
To set your computer’s resolution