SimplySmart Smart Board Software For Mac OS X 99-00557-01 - Manual (Page 34)

28 Using SMART Board Software in Non-Projected Mode Macintosh Version
Using SMART Board Software in Non-Projected Mode
In Non-Projected (Whiteboard) mode, you can write on the screen with dry-erase markers just
as you would on an ordinary whiteboard. However, unlike an ordinary whiteboard, what you
write is simultaneously displayed on a Notebook page.
In this mode, the computer automatically scales the entire surface of the SMART Board
interactive whiteboard into an image the size of the writing area of Notebook software. Since
this scaling is automatic, you don’t need to perform an orientation procedure.
Setting Up the Pen Tray for Non-Projected Use
When you set up the pen tray that comes with your SMART Board interactive whiteboard,
remove the Projection button label from the label recess, revealing the Whiteboard Mode
button label underneath.
This label matches the default settings of SMART Board software in non-projected mode.
Remember that you can still change the default settings for these buttons (page 8).
The upper pen tray button is the New Page button, which is a very important button for non-
projected use. When you press this button, a new page opens in the current Notebook file for
receiving your notes. The bottom button is the Print button, which sends your current page of
notes to the computer’s default printer.
To equip the pen tray, purchase a set of high-quality dry-erase markers in black, blue, red and
green to use with the interactive whiteboard. Place each pen in the matching color slot of the
pen tray.
CAUTION If you own a SMART Board interactive whiteboard with an OptiPro surface,
disregard this section. The OptiPro surface is optimized for use with a projector
and should not be marked with dry-erase ink.
Also, if you have a Rear Projection SMART Board interactive whiteboard,
SMART Board for Flat-Panel Displays interactive overlay or Sympodium
interactive pen display, don’t use SMART Board software in non-projected
mode.
New Page
Print
Button
Label
To remove Label,
insert tip of ballpoint pen
into notch and pry up