SimplySmart Smart Board Software For Mac OS X 99-00557-01 - Manual (Page 35)

Macintosh Version Using SMART Board Software in Non-Projected Mode 29
Setting Up SMART Board Software for Non-Projected Use
When you initially install SMART Board software, it is set to the default Projected (Mouse)
mode. However, if you’re using your interactive whiteboard without a projector, you should
change the software mode to Non-Projected (Whiteboard) in the SMART Board Control Panel.
Otherwise, when you write anywhere other than on the Notebook page, you may accidentally
activate menu commands or other program elements.
1. Click and hold the SMART Board icon and select Open Control Panel.
The SMART Board Control Panel opens.
2. On the Boards tab, click the Non-Projected (Whiteboard Mode) option.
3. Click OK.
Working with Your Notes in Non-Projected Mode
Open Notebook software. As soon as you write on the interactive whiteboard in Non-Projected
mode, you can see your annotation on the Notebook page.
If you don’t want to keep your annotations, simply erase the dry-ink markings on the interactive
whiteboard. This erases the electronic ink on the computer as well.
To keep your annotations, save your Notebook file (page 21).
To annotate on a new page, press the Insert Blank Page button in Notebook software. With
this blank page open, erase the dry-erase ink on your interactive whiteboard and create a new
set of notes.
To switch SMART Board software to the Non-Projected mode