SimplySmart Smart Board Software For Mac OS X 99-00557-01 - Manual (Page 8)

2 Overview Macintosh Version
Mac OS Requirements
* If you use OS X v10.1.5 with SMART USB Adapter Cable (Part No. 93-00481), your
computer may crash unexpectedly, especially if you unplug and plug in the cable repeatedly.
You can eliminate these problems by upgrading to a later version of the Mac operating
system. Another solution is to order a different USB Adapter Cable
(Part No. USB-FRU) from Technical Support.
Mac System Requirements
This hardware and software is supported by SMART Board version 8.1.2 or later. If you have
an older Macintosh running OS 8 or OS 9, you will need to use SMART Board software v6.0.2.
You can download this software from our website at www.smarttech.com.
Installation Options
NOTE: Whether you choose to install SMART Board software from our website or use the
installer CD, you will end up with identical, fully-featured software. The difference? To keep it
small enough to download quickly, the Web install doesn’t include the clip art.
Mac OS X Version Java Version Connection
Handwriting
Recognition
Status
Mac OS X v10.1.5 * 1.3.1 Update 1 SMART USB Adapter
Cable (p/n USB-FRU) n/a Supported
Mac OS X Jaguar
v10.2 1.3.1 Update 1
or later SMART USB Adapter
Cable n/a Supported
Mac OS X Panther
v10.3.2 or later 1.4.2 or later SMART USB Adapter
Cable Yes Recommended
Minimum Recommended
Processor Speed 400 MHz 800 MHz or higher
Memory 128 MB RAM 256 MB RAM or higher
Web Install CD Install Optional CD Extras
Drive Space
Needed 35 MB 103 MB 190 MB +
What’s Included
SMART Board software
and Help files SMART Board software,
Help files, plus SMART
Clip Art Collections SMART Ideas evaluation
software, User Guides,
Acrobat Reader