Sanyo MIRRO PLS-3810 - Manual (Page 103)

Wi
re
le
ss
Se
rv
ic
e
3A. Wireless Service: The Basics 93
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number and press
.
2. Read the message and press .
To answer incoming roaming calls with Call Guard on:
1. Press .
2. Read the message and press .
Data Roam Guard
Depending on service availability and roaming agreements, your
phone may be able to access Web services while roaming on
certain other networks. You can set your phone to alert you when
you are roaming off the home network and try to use Web
services such as messaging.
To set your Data Roam Guard notification:
1. Press > Settings > Others > Roaming >

Data Roam Guard .
2. Select On or Off .
Ⅲ On (default mode) turns your phone’s Data Roam Guard
feature on. You will see a prompt that will require you to
respond anytime you access Web services while roaming.
Ⅲ Off turns your phone’s Data Roam Guard feature off. Your
phone will not notify you of your roaming status when you
access Web services.
To use Web services when Data Roam Guard is active:
ᮣ When a notification appears informing you that data roam
charges may apply, press
ROAM (left softkey) to connect.
Note If the Call Guard feature is set to On, you need to take extra
steps to make and receive roaming calls.