Sanyo MIRRO PLS-3810 - Manual (Page 40)

30 2B. Settings
2. Select Incoming Ringer , Playback Volume , Power Up/Down ,
or Key Beeps .
Ⅲ If you select Power Up/Down , select On or Off .
Ⅲ If you select Key Beeps , select Tone Volume or Tone Type .
3. Select a volume level or type and press .
To change the incoming ringer or playback volume:
1. Press the volume button up or down for most applications,
including playing sounds. A volume setting screen is
displayed.
2. Press the volume button up or down to select the volume
level, and then press
or close the phone. (When the
Ringer and Playback tabs are both displayed, you can switch
between tabs by pressing the navigation key left or right.
Silence All
The Silence All option allows you to mute all sounds without
turning your phone off.
To activate Silence All:
ᮣ Press and hold the volume button down in standby mode.
(The screen will display “Silence All.”)
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a volume
level.
Ringer Settings
Ringer Types
Ringer types help you identify incoming calls and messages. You
can assign ringer types to individual Contacts entries, types of
calls, and types of messages.
Selecting Ringer Types for Incoming Calls
1. Press > Settings > Ringers > Incoming Calls .
Tip You can make the incoming ringer vibrate at any volume
level by pressing VIBRATE (left softkey) on the volume
setting screen.