Sanyo MIRRO PLS-3810 - Manual (Page 49)

Sett
ings
2B. Settings 39
Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only receive incoming calls
or make calls to 911.
1. Press > Settings > Lock Phone .
2. Enter your lock code and press CONTINUE (left softkey).
3. Select Lock Now .
Unlocking Your Phone
1. From standby mode, press UNLOCK (left softkey).
2. Enter your lock code and press CONTINUE (left softkey).
Changing the Lock Code
1. Press > Settings > Lock Phone or Reset/Delete .
2. Enter your lock code and press CONTINUE (left softkey).
3. Select Change Lock Code .
4. Enter your new lock code, and then press CONTINUE (left
softkey).
5. Re-enter your new lock code, and then press SAVE (left
softkey).
Each time you change the lock code, you will be prompted to
create a lock code hint. Press
YES (left softkey) or NO (right
softkey) when prompted.
To display or edit the lock code hint:
ᮣ Press > Settings > Lock Phone > Lock Code Hint .
Parental Controls
This feature allows parents to prevent children from using certain
functions on the phone.
Activating Parental Controls
1. Press > Settings > Parental Controls > On/Off > On .
2. Enter your new code, and then press CONTINUE (left
softkey).
3. Re-enter your new code, and then press SAVE (left softkey).
Tip If you can’t recall your lock code, try using the last four
digits of your wireless phone number or check your lock
code hint. (See “Changing the Lock Code,” below.) If this
doesn’t work, contact your service provider.