Sanyo MIRRO PLS-3810 - Manual (Page 20)

10 2A. Phone Basics
Turning Your Phone On and Off
Turning Your Phone On
ᮣ Press and hold .
Once your phone is on and finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. When
a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key except numbered keys.
Voice Call Icons
Missed Call – You have one or more missed voice calls.
Bluetooth Device – A call is in progress using a Bluetooth device.
Headset – A call is in progress using an optional wired headset.
Car Kit – A call is in progress using an optional car kit device.
Others
TTY – Your phone is connected to a TTY device.
Alarm – An alarm or countdown is set.
Notification – You have events, alarms, or countdown notifications.
HAC Enabled – Your phone’s HAC setting is enabled.
Tip The Power Save feature conserves your battery power
when you are in an area where there is no signal.