Sanyo MIRRO PLS-3810 - Manual (Page 72)

62 2F. Voice Services
Checking Phone Status Using ASR
You can use ASR to obtain information about your phone.
1. Press and hold or .
2. When you hear “Say a command,” say “ Check .”
3. When you hear “Which status item?,” say a command.
Ⅲ Status (all of the following except My Phone Number)
Ⅲ Time
Ⅲ Signal Strength
Ⅲ Network
Ⅲ Battery
Ⅲ My Phone Number
ASR Settings
To change ASR confirmation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Confirmation .
3. Highlight an option and press .
Ⅲ Automatic to ask for confirmation only when the system is
not sure what you said.
Ⅲ Always Confirm to always ask for confirmation.
Ⅲ Never Confirm to never ask for confirmation.
To adapt the system to your voice:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation > Adapt Voice .
3. Press START (left softkey) and repeat each word, phrase, or
telephone number you hear.
To reset the adaptation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation > Reset Voice >
YES (left softkey).
To change the ASR mode:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Audio Modes .
3. Highlight an option and press .
Ⅲ Expert Mode to sound a beep only.
Ⅲ Prompt Mode to prompt for required information.
Ⅲ Readout Mode to prompt for required information and to
read the text displayed on the main screen.