Safeline Sit'n'Stroll - Manual (Page 16)

Switchable Retractors Switchable Retractors Switchable Retractors Switchable Retractors Switchable Retractors
This type of seat belt system stays loose during normal driving. However, they
have special retractors which allow use with child restraints. Read your vehicle
owner’s manual and look for a label on the vehicle seat belt. Note:
Note: Note: Note: Note: Not all vehic Not all vehic Not all vehic Not all vehic Not all vehicle le le le le
belts with switchable retractors have instructions for securing child restraints belts with switchable retractors have instructions for securing child restraints belts with switchable retractors have instructions for securing child restraints belts with switchable retractors have instructions for securing child restraints belts with switchable retractors have instructions for securing child restraints
on the vehicle belt.
on the vehicle belt. on the vehicle belt. on the vehicle belt. on the vehicle belt.
1. Pull the vehicle belt all the way out.
2. Follow steps 1-6 in the directions for manually adjusted belts.
3. Check to ensure the vehicle belt is securely locked by pulling slowly on the
shoulder portion of the belt. It should remain locked. If it is not locked, allow
the car seat belt to fully retract and repeat.
Lap/Shoulder Belt with Buc Lap/Shoulder Belt with Buc Lap/Shoulder Belt with Buc Lap/Shoulder Belt with Buc Lap/Shoulder Belt with Buckle kle kle kle kle T T T T Tongue that ongue that ongue that ongue that ongue that
Slides Freel Slides Freel Slides Freel Slides Freel Slides Freely Along Seat Belt y Along Seat Belt y Along Seat Belt y Along Seat Belt y Along Seat Belt W W W W Webbing ebbing ebbing ebbing ebbing
1. Place the vehicle lap belt over the Sit’n’Stroll ™
and position it through the rear facing vehicle-
belt tabs. Click the latch plate into the buckle.
2. Push down firmly on the Sit’n’Stroll ™ to sink it
into the car’s seat cushion, while pulling on the
shoulder part of the lap/shoulder belt. You may
have to press on one armrest at a time to get
the auto belt tight. Pull the seat belt as tight as
possible across the unit.
3. Hold the lap and shoulder belts together behind
the latch plate . Unbuckle the belt while holding
the belts together.
Free sliding lap/shoulder belts have a free sliding latch Free sliding lap/shoulder belts have a free sliding latch Free sliding lap/shoulder belts have a free sliding latch Free sliding lap/shoulder belts have a free sliding latch Free sliding lap/shoulder belts have a free sliding latch
plate that does not loc plate that does not loc plate that does not loc plate that does not loc plate that does not lock to the belt. k to the belt. k to the belt. k to the belt. k to the belt. When placing the When placing the When placing the When placing the When placing the
Sit’n’Stroll™ in seating positions equipped with this Sit’n’Stroll™ in seating positions equipped with this Sit’n’Stroll™ in seating positions equipped with this Sit’n’Stroll™ in seating positions equipped with this Sit’n’Stroll™ in seating positions equipped with this
system, you must use a locking clip to prevent the system, you must use a locking clip to prevent the system, you must use a locking clip to prevent the system, you must use a locking clip to prevent the system, you must use a locking clip to prevent the
seatbelt from slipping, unless it has a seatbelt from slipping, unless it has a seatbelt from slipping, unless it has a seatbelt from slipping, unless it has a seatbelt from slipping, unless it has a
s s s s switc witc witc witc witchab hab hab hab hable retractor le retractor le retractor le retractor le retractor.....
14 14 14 14 14