Maintenance and care – Safeline Sit'n'Stroll User Manual

Page 30

Advertising
background image

Maintenance and Care

Maintenance and Care

Maintenance and Care

Maintenance and Care

Maintenance and Care

1.

Remove the harness from the Sit’n’Stroll™ and
detach all buckles.

2.

Release the clips securing the fabric cover to
the car seat and remove the cover from the
plastic shell.

3.

Wash the cover and harness in cold water on
gentle cycle with a mild detergent. Do not use
bleach. Roll in towel to remove excess water after
rinsing. Hang the fabric cover to dry or tumble dry
without heat. Do not dry in a heated dryer.

W

W

W

W

Washing the Shell

ashing the Shell

ashing the Shell

ashing the Shell

ashing the Shell

Wheels and Handle System

Wheels and Handle System

Wheels and Handle System

Wheels and Handle System

Wheels and Handle System

I

f needed, clean the wheels and telescoping handle with Armor All

®

spray

lubricant.

To lubricate the moving parts of the Sit’n’Stroll™, use a silicon wax-based lubri-
cant. Do not use an oil-based lubricant anywhere on the Sit’n’Stroll™. An oil-based
lubricant will corrode the plastic components and will inhibit further operation of the
unit. You may order the proper lubricant directly from Safeline Corporation.

5.

The strap should then be placed through the child’s right latch plate (back to
front), up through the chest clip and through the appropriate shoulder belt slot
on the seat back.

6.

Fasten the loop on the end of the strap to the second metal hook.

7.

Check to be sure that the webbing is not twisted. The web should lie flat against
the bottom of the seat shell.

W

W

W

W

Washing the Co

ashing the Co

ashing the Co

ashing the Co

ashing the Cover and Harness

ver and Harness

ver and Harness

ver and Harness

ver and Harness

Wash the car seat shell and stroller parts with a mild soap and warm water using a
soft cloth or sponge.

28

28

28

28

28

Replacement Parts

Replacement Parts

Replacement Parts

Replacement Parts

Replacement Parts

We have carefully designed all of the high wear parts of the Sit’n’Stroll™ to be
easily replaceable. For increased longevity and years of enjoyment, contact our
main office to order replacement parts at reasonable prices.

Advertising