Lap shoulder belts with sewn latch plates – Safeline Sit'n'Stroll User Manual

Page 19

Advertising
background image

There are two basic types of automatic belts: automatic shoulder belts or and
automatic lap/shoulder belts. Both types automatically move around a passenger
when the car door is closed and the car is started. The seat belts will stay loose
until there is a sudden stop or crash.

Check your vehicle owner’s manual for advice on where and how to install a child
restraint. Your vehicle dealer may have a replacement lap belt that, when installed,
will hold the restraint tightly. (Disconnect the passive belt system when using a
replacement lap belt.)

Lap Shoulder Belts with Sewn Latch Plates

Lap Shoulder Belts with Sewn Latch Plates

Lap Shoulder Belts with Sewn Latch Plates

Lap Shoulder Belts with Sewn Latch Plates

Lap Shoulder Belts with Sewn Latch Plates

Manually Adjusted Lap Belts and Locking Latch Plates

Manually Adjusted Lap Belts and Locking Latch Plates

Manually Adjusted Lap Belts and Locking Latch Plates

Manually Adjusted Lap Belts and Locking Latch Plates

Manually Adjusted Lap Belts and Locking Latch Plates

This type of seat belt system will not hold a
restraint tightly in place if the lap belt does
not lock automatically. In a sudden stop or
crash, the restraint may move too far forward
to be safe. The only way to use this seat
belt system with the Sit’n’Stroll

TM

is with a

belt shortening (heavy duty locking) clip.
Obtain belt-shortening clips from your vehicle
manufacturer. To install a belt-shortening
clip, see instructions provided by your
vehicle dealer or vehicle owner’s manual.

NEVER use the locking clip provided with the

NEVER use the locking clip provided with the

NEVER use the locking clip provided with the

NEVER use the locking clip provided with the

NEVER use the locking clip provided with the

Sit’n’Stroll

Sit’n’Stroll

Sit’n’Stroll

Sit’n’Stroll

Sit’n’Stroll

with this type of seat belt system.

with this type of seat belt system.

with this type of seat belt system.

with this type of seat belt system.

with this type of seat belt system.

It is not strong enough to hold the restraint.

It is not strong enough to hold the restraint.

It is not strong enough to hold the restraint.

It is not strong enough to hold the restraint.

It is not strong enough to hold the restraint.

It may bend and release the vehicle belt in the

It may bend and release the vehicle belt in the

It may bend and release the vehicle belt in the

It may bend and release the vehicle belt in the

It may bend and release the vehicle belt in the

event of a sudden stop or crash.

event of a sudden stop or crash.

event of a sudden stop or crash.

event of a sudden stop or crash.

event of a sudden stop or crash.

17

17

17

17

17

Advertising