SiPix StyleCam Blink - Manual (Page 18)

14
Downloading Images to Your PC
After installing the StyleCam Blink TWAIN driver and the utility software, you may begin
downloading the images from the camera to your PC. Please follow these instructions carefully.
Connecting the StyleCam Blink to Your PC
1. Make sure the StyleCam Blink is powered OFF.
2. Connect one end of the USB cable to the StyleCam Blink, and the other end to the
PC’s USB port on the back of your computer. (See figures below)
3. Press the MODE button to turn the StyleCam Deluxe ON.
Transferring Images from the StyleCam Blink to the PC
1. To open ArcSoft PhotoImpression application, go to Start Menu à Programs à
ArcSoft à PhotoImpression.
2. Click the Get Photo button.
3. Click the Camera/Scanner button, and the Select source list will appear.
4. Select StyleCam Blink.
5. Choose the destination album for your pictures from the “Select album” list.
6. Click the Acquire button; the StyleCam Blink TWAIN software window will open.
7. The pictures that you have taken will be displayed in the TWAIN window.
8. Choose the images that you want to transfer or click Select all, and then click the
Transfer button.