SiPix StyleCam Blink - Manual (Page 22)

18
Troubleshooting & Specifications
Troubleshooting
Problem Possible cause Solution
The camera is off. Make sure that the Power indicator is red.
The battery is
discharged. Replace the battery with new or freshly charged one. Refer
to page 4.
The camera
has no power.
The battery is
inserted incorrectly. Check the battery orientation. Refer to page 4.
Is the camera’s
power on? The camera has auto power off after 60 seconds. Make
sure the camera’s power is ON before taking a picture. The camera
won’t take a
picture.
Is the camera
connected to a
computer? The camera’s buttons are not functional when connected to
a PC. Disconnect the camera to take more pictures.
The pictures
are blurry. The Camera or
subject was moving
when the picture
was taken.
Hold the camera steady or put it on a tripod to take
pictures. After pressing shutter button, do not move the
camera until you hear a Beep.
Specifications
Image Sensor CMOS
Output resolution 640 x 480 pixels
Image capacity VGA (640 x 480): 100 (varies) CIF (320 x 240): 300 (varies)
Internal memory 8MB SDRAM
View finder Optical
Status display Monochrome LCD
Focal range 90cm ~ infinity
Lens aperture F3.0
Lens focal length 6.3mm (35mm equivalent = 24mm)
White balance Auto (indoors), Manual (indoors, outdoors)
Exposure adjustment Auto
Image format JPEG, AVI (trough software)
Computer interface USB
Power control Auto power off (60 seconds)
Power source 1 AAA alkaline battery
Tilt base Included
Camera weight 1.5 oz. Without batteries (30g)
Camera dimensions .6” x 1.97” x 1.97” (1.5 x 5 x 5cm)