Sony 3-299-270-21(2) - Manual (Page 12)

12 GB
7
Reattach the rear cap using the wrench (supplied).
8
Secure the speaker to the bracket with the screw in step 3 using hole 4.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Notes
4