Using the volume limit function, Using the input buttons of the remote – Sony 3-299-270-21(2) User Manual

Page 44

Advertising
background image

44

GB

Using the Volume Limit
function

When the System Audio Control function is
active, and the output method changes from the
TV speaker to the system speaker automatically,
loud sound may be output depending on the
volume level of the system. You can prevent this
by limiting the maximum volume level.

1

Press AMP MENU.

2

Press

x/X

repeatedly until “SET HDMI”

appears, then press

or

c.

3

Press

x/X

repeatedly until “VOL LIMIT”

appears, then press

or

c.

4

Press

x/X

to select the maximum

volume level you want.

The maximum volume level changes as
follows:

5

Press AMP MENU.

The AMP menu turns off.

• This function is available only when the Control for

HDMI function is set to on.

• This function is not available when the output method

changes from the system speaker to the TV speaker.

• Sony recommends that you set the maximum volume

level to a little lower than the volume you usually
listen to.

• Regardless of the maximum volume level you set, the

VOLUME +/– button of the subwoofer and the 2 +/
– button of the remote are operable.

• If you do not want to limit the maximum volume

level, select “MAX.”

Using the input buttons of the
remote

The input buttons (TV (white), BD, DVD, SAT,
VIDEO, DMPORT) work as follows when the
Control for HDMI function is set to on.
• BD, DVD, SAT, VIDEO, DMPORT: Since the

input of the TV is also switched automatically,
you can watch the image of the selected
component on the TV simply by pressing the
buttons.

• TV: The input of the TV switches

automatically. When you connect a Sony TV,
you can watch the TV simply by pressing the
button.

• You can control connected Sony components by

pressing the input buttons. For details, see
“Controlling the Connected Sony Components with
the Remote” (page 50).

Notes

Tips

MAX

y 49 y 48 y

......

y 2 y 1 y MIN

Tip

Advertising