Sony 3-299-270-21(2) - Manual (Page 64)

64 GB
3
Press x/X repeatedly until “A. ASSIGN”
appears, then press or c.
4
Press x/X to select the audio input you
want to reassign.
• ANALOG VD: reassigns the analog
audio input to the
“VIDEO” function.
• ANALOG TV: reassigns the analog
audio input to the “TV”
function.
• ANALOG SAT: reassigns the analog
audio input to the “SAT”
function.
• ANALOG DVD:reassigns the analog
audio input to the
“DVD” function.
• ANALOG BD: reassigns the analog
audio input to the “BD”
function.
5
Press AMP MENU.
The AMP menu turns off.
• When images of an audio component are output, the
sound may not be output. In this case, check the
following:
– Confirm the audio analog input jacks correspond
with the function.
– Reassign the function.
• You cannot use the analog audio input for the original
input if it has been reassigned to another input.
• You cannot reassign the analog audio input to the
“TUNER/BAND” and “DMPORT” function.
Reassigning the digital audio
input
You can reassign an audio input that has coaxial
(digital) signal to the “DVD” or “SAT” function,
if either one function is not being used.
For example, to output the audio source for DVD
player using the ASSIGNABLE COAXIAL
SAT IN jack on the subwoofer:
• Connect the coaxial output jack of the DVD
player to the ASSIGNABLE COAXIAL SAT
IN jack on the subwoofer.
• Assign the “DVD” function to “COAX DVD”
in the “D. ASSIGN” setting.
1
Press AMP MENU.
2
Press x/X repeatedly until “AUDIO”
appears, then press or c.
3
Press x/X repeatedly until “D. ASSIGN”
appears, then press or c.
Notes
1 2 3
4 6
7 8
0 ENTER CLEAR
9
THEATRE
TV ?/1
AV ?/1
TV BD DVD SAT
TOP MENU MENU
BD/DVD
RETURN/EXIT
TV
F1 F2
AMP MENU
DISPLAY
TONE
TUNING - TUNING +
NIGHT
MODE
A/B DIGITAL ANALOG
DMPORT TUNER/BAND VIDEO SOUND FIELD
?/1
TV CH -
PRESET -
TV CH +
PRESET +
F
G g
f
.
H m M
X x
< < >
5
SYSTEM STANDBY
MENU/HOME
TOOLS/
OPTIONS
AMP
MENU
C, X, x, c,