Sierra Wireless DART 200 CDPD Modem User Manual

Page 128

Advertising
background image

DART 200 CDPD Modem User’s Guide

D SLIP Setup Examples

Sierra Wireless, Inc.

D-2

To set up Trumpet:

1. Start Trumpet from Windows (Icon, or File/Run/TCPMAN).

2. On the Trumpet Winsock Screen, click on File then click on

Setup. The Trumpet setup screen appears:

3. Set IP Address to DART NEI (IP Address).

4. Set Default Gateway to DART SLIP address (1.1.1.2 by

convention). If this field is grayed out, turn off internal SLIP
temporarily to access it.

5. Set MTU to 296 and MSS to 256.

6. Set Timeout = 5.

7. Turn Internal SLIP - ON if it was off.

8. Check that the modem is at the baud rate selected.

9. Turn Van Jacobsen Compression - ON.

- Be sure to specify *C1 on the DART profile.

10. Turn Hardware Handshake - ON.

- Be sure to specify \Q2 on the DART profile.

The rest of the setup fields can be allowed to default.

11. Click on OK to save changes and return to Trumpet Winsock

Screen.

12. On the Trumpet Winsock Screen, click on Dialer then click on

Options.

13. Select No Automatic Login, then click OK to save changes and

return.

14. Exit Trumpet.

Advertising