Sierra Wireless DART 200 CDPD Modem User Manual
Page 2
Advertising
DART 200 CDPD Modem User's Guide
Sierra Wireless, Inc.
ii
?
NOTE:
This guide provides the information necessary to program the Data Access Radio Transceiver
(DART) 200 for operation on Cellular Digital Packet Data (CDPD) 1.0 or 1.1 networks. The factory
default is for 1.1 mode. If you need to operate in CDPD 1.0 mode, refer to Selecting CDPD 1.0 or 1.1
mode of operation, p. 2-8, for detailed instructions.
The guide provides information for use with the current released version of the DART 200 software
(3.0.10). See the ATI command in Appendix F, DART AT Commands, to determine the firmware
version your DART 200 is currently using. If you need a prior or newer version of the software please
contact Sierra Wireless for the desired download package.
Advertising