Sierra Wireless DART 200 CDPD Modem - Manual (Page 137)

DART 200 CDPD Modem User’s Guide E S-Registers
PN1197-00 Revision 1.0 E-7
Table E-2. Register summary (cont.)
Register Value Default Description
S57 (RO) bitmapped 0 Network status
0,1
•
Registration state:
0 = unregistered
1 = registered
2,3
•
Connection state:
0 = no connection
4 = connection
8 = incoming connection
pending
12 = outgoing connection
pending
4
•
Auto Registration with
connection (\R2); ATD
command only
0 = Disable Auto-Reg with
connection
16 = Enable Auto-Reg with
connection
5
•
Auto Registration with Power
(\R4):
0 = Disable Auto-Reg with
Power ON
32 = Enable Auto Reg with
Power ON
6 • Auto SLIP Mode
0 = inactive
64 = active
7
•
RF in range:
0 = out of range
128 = in range and synchronized
S58 (RO) bitmapped 185 PAD status
0
•
Auto transmit mode on; see \T
command
1 • Manual transmit mode on; see
\M command
2,3 • Flow control mode; see \Q
command
4,5 • Data forwarding character
option; see \F command
6 • Unused
7 • PAD Operating Mode; see \O
command
S59 (RO) 0..255 0 Reserved
S60 (SM) bitmapped 1 Value Function
0 1 Loopback
1 2 Reserved
2 4 Force channel selection
3 8 RRM logging enabled
4 16 RRM disabled
5 32 Receive frame logging