StorageTek StorageNet 4000 - Manual (Page 30)

Zone Configuration Commands
4-4 8946121502
cfgDelete
Figure 4-8 shows the cfgDelete command. This command deletes an existing zone
configuration.
Figure 4-8 cfgDelete Command
cfgRemove
Figure 4-9 shows the cfgRemove command. This command removes one or more
cfg_members from an existing zone configuration.
Figure 4-9 cfgRemove Command
The members removed are found by an exact string match when removing multiple members
order is important. If this command results in all members being removed, the zone
configuration is deleted.
cfgShow
Figure 4-10 shows the cfgShow command. This command prints the specified zone
configuration definition if a parameter is given (otherwise all zone configuration information is
printed).
Figure 4-10 cfgShow Command
admin> cfgDelete “USA_cfg”
value = 0 = 0x0
admin> cfgRemove “USA_cfg”, “Green_zone”
value = 0 = 0x0
admin> cfgShow
Defined configuration:
cfg: USA_cfg Red_zone; Blue_zone; Green_zone
zone: Blue_zone
0,1; array1; 0,2; array2
zone: Red_zone
0,0; loop1
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
Effective configuration:
cfg: USA_cfg
zone: Blue_zone
0,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
0,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Red_zone
0,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
value = 1 = 0x1