Sun Microsystems X1150A User Manual
Page 57
Chapter 3
Network Configuration
35
Following are examples showing the usage of the boot net command line with
device parameters specified:
To attempt to force the link-up while advertising 100 Mbps full duplex capability to
the link partner:
To attempt to force link-up while advertising 1000 Mbps full duplex link-clock
master capibility to the link partner:
Note –
The link partner must be configured as link-clock slave.
To attempt to Auto-Negotiate the link while advertising 1000 Mbps full and half
duplex and link-clock auto capability to the link partner:
Note –
Link partner must Auto-Negotiate in order to link-up at 1000 Mbps.
# boot net:speed=100,duplex=full,
# boot net:speed=1000,duplex=full,link-clock=master,
# boot net:speed=1000,duplex=auto,link-clock=auto,