Sun Microsystems X1150A - Manual (Page 78)

56 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • February 2003
Reporting the Link Partner Capabilities
TABLE 4-11 describes the read-only link partner capabilities.
If the link partner is not capable of autonegotiation (when lp_cap_autoneg is 0),
the remaining information described in TABLE 4-11 is not relevant and the parameter
value = 0.
If the link partner is capable of autonegotiation (when lp_cap_autoneg is 1), then
the speed and mode information is displayed when you use autonegotiation and the
link partner capabilities.
TABLE 4-11 Read-Only Link Partner Capabilities
Parameter Description
lp_cap_autoneg 0 = No autonegotiation
1 = Autonegotiation
lp_cap_1000fdx 0 = No 1000 Mbit/sec full-duplex transmission
1 = 1000 Mbit/sec full-duplex
lp_cap_1000hdx 0 = No 1000 Mbit/sec half-duplex transmission
1 = 1000 Mbit/sec half-duplex
lp_cap_100fdx 0 = No 100 Mbit/sec full-duplex transmission
1 = 100 Mbit/sec full-duplex
lp_cap_100hdx 0 = No 100 Mbit/sec half-duplex transmission
1 = 1000 Mbit/sec half-duplex
lp_cap_10fdx 0 = No 10 Mbit/sec full-duplex transmission
1 = 10 Mbit/sec full-duplex
lp_cap_10hdx 0 = No 10 Mbit/sec half-duplex transmission
1 = 10 Mbit/sec half-duplex
lp_cap_asm_pause 0 = Not asymmetric pause capable
1 = Asymmetric pause towards link partner capability
lp_cap_pause 0 = Not symmetric pause capable
1 = Symmetric pause capable