Standers 580 - Manual (Page 44)

User Guide
36 2130374
(For further information on specific operating systems, consult
Windows® Help (
Start > Help ).
A “Location Information” window has popped up asking
for dialing information. Do I need to put any information in
this window?
Windows 98 SE & Windows Me ONLY: During Watcher
software loading, if the computer has never had any modem
configuration performed, the
Location Information screen may
pop up. This window has nothing to do with Watcher
software. Windows just thinks a modem is being loaded and is
asking for dialing information. Simply put in the area code of
the computer’s location. The remaining requested information
can be left blank or dummy information can be put in. Infor-
mation in this window will not affect the AirCard 580. After
entering the information click
Close . (This only applies if the
computer also uses a dialup modem).
I use Windows 98 SE and I've noticed that my computer is
performing slower than usual, why?
On the second attempt by Windows 98 SE to go into Standby
Mode, the system may become sluggish and unusable. The
computer must be rebooted at this point in order to recover
and restore normal operating speed.
It is recommended to inhibit Standby Mode by selecting
Standby “Never” option under the ‘Power Manager’ menu options
in the Control Panel. It is also recommended not to use Start
>Shutdown > Standby .
What do I do with the message window: “The feature you
are trying to use is on a CD-ROM or other removable disk
that is not available. Insert the 'Watcher' Disk and click
OK”?
If Watcher is being loaded on a computer that has a fresh
Windows 2000 operating system load and has not had any
other software loaded to this point, you may see the following
message: “The feature you are trying to use is on a CD-ROM or
other removable disk that is not available. Insert the ʹ Watcher ʹ
Disk and click OK”. Dismiss the message by clicking
Cancel .
This is a one time event and should not happen again.