SUUNTO MARINER | REGATTA | YACHTSMAN - Manual (Page 12)

5
CHAPTER 1 INTRODUCTION
1.1 MAIN FUNCTIONS (MODES)
The Mariner/Yachtsman features the following functions: sailing timer, barometer, compass and watch. These
are identified as sail mode [SAIL], barometer mode [BARO], compass mode [COMP] and time mode [TIME] in
this manual and also on the display of the instrument.
The Regatta features the following functions: compass, chronograph and watch. These are identified as compass
mode [COMP]. chronograph mode [CHR] and time mode [TIME].
1.1.1 Backlight Features
The Wristop Computer has an electroluminescent backlight. This is initiated by pressing and holding the [Mode]
button in for 2 seconds. The backlight will remain on for 5 seconds. Pressing the [Mode] button during this time
will restart the 5 second period, continuing the backlight feature.
1.1.2 Water Resistance
The Wristop Computer is waterproof to a depth of 30m/100ft.
Note: The Wristop Computer models are not dive instruments. Buttons should not be operated (put to use)
while under water.
1.2 BUTTON FUNCTIONS
Four buttons are used to operate the Wristop Computer: [Mode], [+] (ON/OFF), [-] (Fast Bearing), and [Select].
1.2.1 The [Mode] Button
Is located on the top right of the Wristop Computer.
• In the main mode level, pressing the [Mode] button allows the user to select or move from one mode or
function to the next (TIME, SAIL, BARO, COMP).
• In the sub mode level, pressing the [Mode] button returns the user to the main mode level.
• In the setup process, pressing the [Mode] button accepts the changes or preferences. Pressing the button
again will return the user to the main mode level.