SUUNTO MARINER | REGATTA | YACHTSMAN - Manual (Page 20)

13
Note: Only one race can be stored in the memory. As soon as the count down function is restarted, the information
from the previous race will be erased from the memory.
CHAPTER 3 CHRONOGRAPH MODE (REGATTA)
The chronograph mode is able to:
• measure and store 1-99 split and lap times for up to 99 runs; and
• obtain a maximum range of one run (timing event) up to 23 hours 59 minutes and 59.9 seconds. Upon
exceeding this range the Regatta will activate an audible sound to indicate the maximum range has been
reached and the timing process has stopped.
To view Chronograph mode:
Check the Mode Indicator Bar. If the mode arrow is not on CHR, PRESS the [Mode] button until the arrow is
directly below CHR on the bar.
In the Chronograph mode (Fig. 7):
• Field 1 displays the seconds and tenths of seconds of the timer.
• Field 2 displays the timer showing the hours and minutes.
• Field 3 displays the current time and to the right the text “Stopwatch”.
Note: If the stopwatch function is on and the user is in another mode other than the main chronograph mode,
the text “Stopwatch” flashes to remind the user this function is activated.
3.1 HOW TO USE THE CHRONOGRAPH
In the chronograph mode:
1. PRESS the [+] button to start the stopwatch.
2. PRESS the [-] button to store the lap time and split time in memory.
Lap and split times are displayed as follows:
In Field 1 the lap time is shown for the latest lap shown in Field 3 “L #” (# = lap number) (Fig. 8). The lap time is
displayed for five seconds before the measured split time is displayed.