SUUNTO MARINER | REGATTA | YACHTSMAN - Manual (Page 21)

14
The split time is indicated by the abbreviation “SPL” (SPL = split) in Field 3 displaying for five seconds before it
returns to showing the running time (Fig. 9).
Note: The user can continuously press the [-] button during this activity and can record and display new lap and
split times up to 99 times.
3. PRESS the [+] button to stop the stopwatch.
4. PRESS the [-] button to reset the stopwatch to zero once the stopwatch has stopped.
Note: If the user decides to go to a different mode while utilizing the chronograph feature, the chronograph/
stopwatch will continue to run in the background.
The timing of another event cannot start until the stopwatch has been zeroed after the first timing. The zeroing
is done by pushing the [-] button.
3.2 HOW TO VIEW THE CHRONOGRAPH MEMORY
In the Chronograph mode, PRESS the [Select] button once. This sub mode features three screens. These
screens automatically rotate displaying a summary of information of the most recent completed timed event in
intervals of 4 seconds.
In the first display (Fig. 10):
• Field 1 displays the year;
• Field 2 displays the event number “CH #”; and
• Field 3 displays date of the timed event
The user can PRESS the [-] button to scroll down to view previous timed events captured and then PRESS [+]
button to scroll up to the most recent completed timed event.
The second display shows duration of run/timing event on the bottom row (Fig. 11):
• Field 1 displays the seconds and tenths of seconds of the timed event;
• Field 2 displays the total time of the event in hours and minutes; and
• Field 3 displays the text “ dUr “ (dUr = duration).
The third display shows the total number of laps stored into memory (Fig. 12):