Samsung HT-AS730S - Manual (Page 35)


E
N
G
●
S
et
U
p
Speaker SetUp
Setting the speaker size
Signal outputs and frequency response from the speaker will be
adjusted according to your speaker configuration and whether certain
speakers are used or not.
Press SETUP/MENU button.
“INPUT” appears on the display.
Press ▲▼ button to select “SPEAKER”, and then press the
ENTER.
Press ▲▼ button to select “SPK SIZE”, and then press the
ENTER or ▶ button.
Press ◀▶ button to select the speaker you want.
Each time you press this button, FRONTCEN  SURR 
S.BACK  S.W  CROVR will be selected in turn.
Press ▲▼ button to set the mode (LARGE, SMALL etc.) for
the selected speaker.
Repeat steps 3-4 to set the mode for each speaker.
- to exit setup mode -
Press SETUP/mEnU, ExiT or RETURn button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER Possible Settings Default Setting
FRONT(Front) LARGE, SMALL SMALL
CEN(Center) LARGE, SMALL, NONE SMALL
SURR(Surround) LARGE, SMALL, NONE SMALL
S.BACK (Surround Back) LARGE, SMALL, NONE SMALL
SUB(Subwoofer) ON, OFF ON
CROVR (Crossover Frequency) 60, 80, 100,120, 150, 180, 200(Hz) 150Hz
LARGE : Select when using large speakers. You can listen to full range sound.
SMALL : Select this when using small speakers
NONE : Select when no speaker is used
ON (subwoofer) : Select when using the subwoofer speaker.
OFF (subwoofer) : Select when not using the subwoofer speaker.
CROVR : Select the crossover frequency for the best bass response in your room.
1.
~
2.
3.
4.
~
5.
6.
~
~
~
~
~
~
~



HT-AS730S-XAA_0204.indd 35 2009-02-05 �� 11:47:40