Samsung HT-AS730S - Manual (Page 41)

1
E
N
G
●
S
et
U
p
SUrrOUnD SetUp (Continued)
Setting Sfe(Sound field effect) mode
The SFE (Sound Field Effect) function uses 9 different DSP sound field
effects to digitally simulate actual music environments such as concert
halls or cinemas.
Press SETUP/MENU button.
“INPUT” appears on the display and goes into Setup Mode.
Press ▲▼ button to select "SURROUND", and then press the
ENTER.
Press ▲▼ button to select "SFE", and then press the ENTER
or ▶ button.
Press ▲▼ button to set the Sound Field Effect you want.
Each time you press the button, HALL 1 HALL 2 JAZZ
CLUB  CHURCH  ROCK  CLASSIC  LIVE  GAME

MOVIE will be selected in turn.
Setting neO:6 mode
You can play back 2 channel sound over 6.1 channels when enjoying
music or a movie.
Press SETUP/MENU button.
“INPUT” appears on the display and goes into Setup Mode.
Press ▲▼ button to select "SURROUND", and then press the
ENTER.
Press ▲▼ button to select "NEO:6", and then press the
ENTER or ▶ button.
Press ▲▼ button to set the NEO:6 mode you want.
neO:6 mODe : Each time you press ▲▼ button, MUSIC

CINEMA will be selected in turn.
This mode decodes 2 channel signals to a high precision
digital matrix decoder for 6.1 channel sound.
mUSiC : NEO:6 MUSIC mode is optimized for music
playback
Cinema : NEO:6 CINEMA mode is optimized for movie
playback.
Center image : Press ▲▼ button to set the sound image you want.
You can set the sound image from 0 to 7
This parameter adjusts the height of the center image through the front and center speakers. “0”
is the lowest while “7” is the highest.
- to exit setup mode-
Press SETUP/mEnU, ExiT or RETURn button.
“SETUP OFF” appears on the display and Setup Mode is exited.
NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
1.
~
2.
3.
4.
~
1.
~
2.
3.
4.
~
~
~
M
`
`







HT-AS730S-XAA_0204.indd 41 2009-02-05 �� 11:47:53