Saleen 10-8002-C11790A - Manual (Page 7)

7
I Wheel Removal
Figure 1
Order of Operations:
1. Jack up the front of the car, and place
jack stands underneath the chassis
members.
2. Lower the car onto the jack stands.
The car should stay in this position
for the entire front suspension
replacement.
3. Remove five 13/16” nuts using the
1/2” air gun and 13/16” deep socket.
(Figure 1) Be careful when you
remove the last nut, as the wheel
could fall off.
4. Remove wheel; repeat on other side
of car.
Obtain the following tools:
• 13/16” deep socket, ½” drive
• ½” impact gun