Saleen 10-8002-C11790A - Manual (Page 8)

8
II Front Struts Removal
Figure 1
Order of Operations:
NOTE: Keep ALL hardware for
installation of new suspension
components.
1. Remove the two lower strut bolts
using a 3/8” impact gun with a 18mm
deep socket. (Figures 1 and 2)
2. Unbolt the end link from the strut
using the 3/8” impact gun with the
18mm socket. (Figure 3)
Obtain the following tools:
• ½” drive impact gun
• 13/16” deep socket, ½” drive
• 3/8” drive impact gun
• 15mm deep socket, 3/8” drive
• 18mm deep socket, 3/8” drive
• 13mm deep socket, 3/8” drive
• 10mm socket, 3/8” drive
Figure 3
Figure 2