Saleen 10-8002-C11790A - Manual (Page 9)

9
Figure 5
3. Unbolt the brake line from the strut
using the 3/8” impact with the 10mm
socket. Remove the Christmas tree
that holds the ABS line in place.
(Figure 4)
4. Using the 13 mm deep socket and
3/8” drive impact gun, remove the
nuts from the four upper strut bolts
(in the engine bay). (Figure 5)
5. Carefully maneuver the strut out of
the wheel well so that it does not hit
the brake lines.
6. Keep the strut; you will need parts of
it to complete the assembly of the
new front strut.
7. Repeat steps 1 – 6 to remove the front
strut from the other side of the car.
Figure 4